Summary
When a hard drive becomes uninitialized, it becomes inaccessible via Windows Explorer, often due to logical or physical damage. However, data recovery is usually possible if the correct procedures are followed. Factors that can cause a drive to become uninitialized include corrupted partition tables, faulty or outdated drivers, power surges or loss, and file system damage. The article provides guidance on recovering data from such a drive while minimizing the risk of further damage.
Table of contents
When a hard drive becomes uninitialized/unallocated, you can’t access its data using Windows Explorer. This issue often arises due to logical or physical damage, but the good news is that your data is usually recoverable if you follow the correct data recovery procedures. This article will guide you through the process of recovering data from an uninitialized disk while minimizing the risk of further damage.
Several factors can cause an old drive to become uninitialized, including
- Corrupted Partition Table: Malware, improper ejection, bad sectors, and software errors can corrupt your drive’s partition table, making it unrecognizable to Windows.
- Faulty or Outdated Drivers: Problems with your drive’s software driver can prevent Windows from detecting and reading your drive properly.
- Power Surges and Power Loss: Hard drives and SSDs are sensitive to power fluctuations, which can result in the drive becoming uninitialized.
- File System Damage: A damaged file system can lead to various issues, including the drive becoming uninitialized.
In cases of accidental deletion or malware-induced data loss, a data recovery program can often help. However, when a drive becomes uninitialized, it usually indicates deeper issues. Here’s a step-by-step guide to recovering data from an uninitialized drive:
Physically damaged drives rarely fare well in DIY data recovery. Listen for any unusual clicking, whirring, or beeping sounds.
Example Sound:
Since SSDs don’t have moving parts, check if your PC detects the drive. Improperly connected or physically damaged drives won’t show up in Windows Disk Management . To be sure, connect your drive to another PC using a different SATA cable.
- 1. Press
Win + R.
- 2. Input
diskmgmt.msc
If the drive remains undetected, it’s likely physically damaged, and you should seek professional help. If it does show up in Disk Management, you can proceed with DIY data recovery.
Creating a disk image is crucial to prevent further damage. Data recovery scans are stressful and can wear out an already damaged drive. A disk image captures the present state of the drive, shielding you against further data loss. Use the built-in disk imaging feature of a data recovery program. You’ll need another drive with enough storage capacity to store the disk image. To create a disk image using Renee Undeleter, follow these steps:
1. Download Renee Undeleter and install it.
2. Ensure the uninitialized drive is connected to your PC. If your computer is not bootable , please try to use an USB enclosure to wrap the drive and connect it to another healthy PC.
3. Open Renee Undeleter, and click on Image Creation .
4. Select the uninitialized drive, and click the Create button.
5. Renee Undeleter will create the disk image. It may take a while, depending on the drive’s size.
For regular users, Renee Undeleter is a user-friendly option. For more advanced users, TestDisk is equally competent but less user-friendly.
Option 1: Renee Undeleter
Renee Undeleter is a comprehensive data recovery software that can assist in retrieving a wide range of files that have been lost due to accidental deletion , recycle bin emptying , disk or memory card formatting , and various other data loss incidents. This robust tool includes four essential modules: Fast Partition Scan , Whole Partition Scan , Whole Disk Scan , and Image Creation , offering a multifaceted approach to restoring lost data during system operation.
How to recover hard disk data with Renee Undeleter?
Restoring data with Renee Undeleter is very simple, the specific steps are as follows.
Step 1: Download, install and run Renee Undeleter, select the ( Whole Disk Scan ) option on the main interface.
Note: Do not install on the disk that needs to restore data, so as not to cause data overwriting.
Data Recovery Features
Fast Partition Scan: Recovers files from accidental deletions or recycle bin clearance.
Whole Partition Scan: Restores files from inaccessible or formatted partitions.
Whole Disk Scan: Analyzes partition information for a comprehensive disk scan.
Image Creation: Generates a partition mirror image for backup purposes.
Step 2: Next, select the hard disk device to be scanned, and click (Next). Select (default setting) on the advanced setting interface.
Step 3: The software will initiate a scan of the hard drive and present a “Select the partition you need to scan” message. Select the appropriate partition.
Step 4: After the scan, preview the files by double-clicking in the preview pane on the right. To recover a file, highlight it and click the Recover button located at the bottom-right corner.
Step 5: Click ( Browse ) to select another disk to save the recovered files, and then click the ( Restore ) button to start the file recovery command, you just need to wait patiently.
Option 2: TestDisk
TestDisk is a free, open-source, and lightweight tool that can recover lost partitions, repair damaged partition tables, and recover files. However, it lacks a GUI and file preview, making it suitable for seasoned PC users. To recover data from an uninitialized drive using TestDisk:
1. Download TestDisk, and extract the downloaded package.
2. Open the TestDisk folder, and run testdisk_win.exe . Use the Arrow keys to navigate and press Enter to confirm selections.
3. Choose whether to create a log file and press Enter. This doesn’t affect the data recovery process.
4. Select the uninitialized drive and press Enter.
5. TestDisk auto-detects the partition table. Press Enter on the partition table selection screen. Only modify the selection if you’re sure the disk uses a different partition table.
6. Select Analyse and press Enter.
7. Select Quick Search and press Enter.
8. TestDisk will list the partitions it discovers. Highlight a partition and press P to view its files.
9. Navigate to a directory and press Enter. Select files/folders to copy by pressing Shift +: (Colon) and then Shift + C to begin copying. Navigate to the destination folder and press Shift + C again to copy the files.
10. Close TestDisk when done.
Avoid these actions to maximize your data recovery chances:
- Don’t initialize the drive before data recovery.
- Don’t format the drive.
- Don’t run CHKDSK on an uninitialized drive. It won’t work because Windows can’t read the file system.
- Don’t use the diskpart utility in CMD to create new partitions or clean the uninitialized drive.
Yes, but it’s not guaranteed that you’ll retain your data. To initialize a drive without formatting it:
1. Open Disk Management.
2. Right-click on the uninitialized disk and click Initialize .
3. Choose a partition table type and press OK .
CHKDSK only works on drives with a recognizable file system. Since the drive is uninitialized, Windows can’t read its file system, preventing CHKDSK from running.
First, ensure you have a backup of your data . If not, recover your files using a data recovery program. After recovering your data: – Ensure the drive is properly connected to your PC. Try connecting it to another PC.
- Initialize the drive using Disk Management.
- Update the disk’s drivers using Disk Management, and reboot your PC.
- Contact a professional if you suspect physical damage.
Recovering data from an uninitialized drive involves careful physical examination, creating a disk image, and then scanning it with a data recovery tool . Avoid initializing, formatting, or running CHKDSK scans before data recovery. After recovering your files, you can attempt to fix the drive.
Relate Links :
How to recover files from an external hard drive that is not detected?
20-05-2024
Amanda J. Brook : Ensure the external hard drive is properly connected; troubleshoot physical issues first. Learn how to recover files from...
27-07-2021
Ashley S. Miller : If you want to change a solid hard drive, you should clone the data from the source drive...
How to Initialize External Disk and Recover Data on Windows?
18-10-2019
John Weaver : Sometimes, we need to initialize an external disk. How to initialize a disk on Windows? How to recover...
How to Initialize Disk and Choose MBR or GPT?
17-04-2019
Ashley S. Miller : How to choose the partition table for a new disk? In the essay, we will tell you the...
Comments
0 comments
Please sign in to leave a comment.