Table of contents
SDHC , an acronym for “ Secure Digital High Capacity ,” provides storage capacities ranging from 4GB to 32GB . It represents an evolution of the standard SD card, transitioning from the FAT12/FAT16 to the FAT32 file system, thereby supporting a maximum capacity of 32GB . For data transmission, SDHC cards are classified into Class 2 , Class 4 , and Class 6 , which are indicative of the minimum write speeds necessary for recording high-resolution video in real time.
SD , short for “ Secure Digital ,” refers to a type of secure digital memory card. SDXC stands for “ Secure Digital eXtended Capacity ,” indicating a higher storage capacity. The quality and safety of SD, SDHC, and SDXC cards are comparable; however, they differ in maximum capacity . SD cards can hold up to 2GB , SDHC cards up to 32GB , and SDXC cards can accommodate up to 2TB (2048GB) .
SDHC cards , which utilize a different addressing method , are incompatible with SD devices that predate the SD 2.0 specification . Only devices that are compliant with SD 2.0 or later can utilize SDHC cards. If an SDHC card is inserted into an older device, the card will not be recognized in order to safeguard the data . It is essential to consult the device’s product manual or official page to determine the supported card types before selecting an SD card.
After a preliminary understanding of the definition of SDHC card and the difference between it and SD card and SDXC card, let’s understand the method of recovering SDHC card data.
Renee Undeleter is a versatile data recovery software that supports retrieving files from local drives, SD cards, and portable hard disks on both Windows and Mac systems. It’s ideal for situations such as accidental deletions , emptied recycle bins , or formatted storage devices . The software features four key modules: file recovery , format recovery , partition recovery , and image creation , offering a comprehensive solution for various data loss scenarios.
Recovering lost or deleted data with Renee Undeleter is very simple, the specific steps are as follows:
Step 1: Connect the SDHC card to the computer through a card reader, download, install and run Renee Undeleter, and select the ( Whole Partition Scan ) option in the main interface.
Data Recovery Features:
- Fast Partition Scan: Recovers files from accidental deletions or emptied recycle bins.
- Whole Partition Scan: Restores files from formatted or inaccessible partitions.
- Whole Disk Scan: Analyzes partition information for a comprehensive scan.
- Image Creation: Backs up a partition’s current state by creating a mirror image.
Step 2: Next, select the SDHC card partition and click on ( Next ). Then enter the scanning process, please wait patiently.
Step 3: After the scan is over, you can double-click the file to preview, then select the file to be recovered, and click the ( Recover ) button to restore the file to another disk.
If your SDHC card cannot be accessed, the files in the SD card cannot be successfully obtained. It is recommended to try to repair it through the following methods.
If your computer cannot access the SDHC card after connection, it could be because the card lacks an assigned drive letter . Assigning a drive letter will typically grant you normal access to the card’s files.
Step 1: Run the computer, type (computer management) in the search box in the lower left corner, and then click to enter the function option box.
Step 2: Next, click (Disk Management) on the left window, if you see a drive without letters, please check if it is an SDHC card device.
Step 3: After confirming the completion, right click on it and select (Change Drive Letter and Paths) option.
Step 4: Next click (Add) to add a new drive letter to the SDHC card.
Step 5: Next, check (Assign the following drive letter) and select a letter, then click (OK) to add the drive letter. You can then open the SDHC card in File Explorer and access the files on it.
To access the contents of the SDHC card, the computer needs to establish a connection with the card. Should the SDHC card driver become outdated or corrupted , it may impede access to the card’s data. Reinstalling the necessary drivers is often a reliable solution to this problem.
Step 1: Power on your Windows PC and insert the SDHC card into a card reader. Press Windows key + R to open the Run dialog. Type devmgmt.msc and click the OK button to enter Device Manager.
Step 2: In “Disk Drives”, right-click the SDHC card and choose Uninstall Device . Click Uninstall in the confirmation window. Once the card is removed from the list, eject it from your computer. Reinsert the card to prompt your computer to download and install the latest driver automatically.
Relate Links :
How to Fix When Files on SD Card Not Showing up on Android?
27-12-2021
Amanda J. Brook : Sometimes, the SD card files are not showing up on Android. How can we solve the problem? In...
How to Fix GoPro SD Card Error?
29-12-2021
Ashley S. Miller : Some people meet with the GoPro SD card errors, such as “NO SD” and “SD ERR”. In this...
Solutions to SD Card Unexpectedly Removed on Android
24-12-2021
Jennifer Thatcher : Some Android users complain that they always receive the notification saying that the SD is unexpectedly removed. In...
How to Fix Corrupted SD Card on Android?
16-12-2021
John Weaver : SD card is used in various devices, phones, cameras and video games. How to fix the corrupted SD...
Comments
0 comments
Please sign in to leave a comment.