Restarting the computer is often the go-to solution when facing a failure. So, if you come across the error message “We couldn’t create a new partition or locate an existing one,” you might want to try restarting the computer. Some users have reported that this simple action resolved the issue for them.
“We are unable to generate new partitions or locate existing ones.” This issue could also stem from difficulties with external device connections. To troubleshoot, attempt connecting external devices (like a bootable USB) to different ports on the computer and restarting the interrupt process. If the problem persists, reconnecting the external device (such as a bootable USB flash drive) to its original port may resolve the issue.
The primary partition, also known as the primary disk partition, is a type of disk partition. It is typically used to store Windows installation files and startup files, making it an essential component of the system. The active partition, on the other hand, is the primary partition that contains boot data. This allows it to perform various tasks, such as handover and startup, with the BIOS to successfully boot the system. To set the primary partition as the active partition, one can utilize the Diskpart command.
Step 1: Start the Windows installer using the USB installation media. Return to the “Install Now” interface and click (Repair your computer).
Step 2: Next, find and select (Troubleshoot) > (Advanced Options) > (Command Prompt) option.
Step 3: Next, enter the (diskpart) command in the command prompt window and press the (Enter) key.
Step 4: Enter the following command and press the (Enter) key after entering the command. After that, reinstall the system to see if the problem is resolved.
list disk (will list the disk in the computer)
select disk 0 (select disk 0. 0 is the hard drive letter where Windows is to be installed, and can be filled in according to the actual situation)
list partition (list the partitions in the disk, you can view the partition type and size)
select partition 1 (select partition 1. 1 is the number of the primary partition where the Windows system is to be installed, please modify it according to your partition.)
active (set the partition as active)
Exit (Exit the Command Prompt window)
If the above method does not work, you can also try using the Diskpart command. This will format the target disk, clear all data, rebuild the primary partition, and mark it as active. However, it is important to note that before using this method, it is recommended to back up all data to avoid any potential loss. The following are the specific steps for this operation:
Step 1: Start the Windows installer using the USB installation media. Return to the “Install Now” interface and click (Repair your computer).
Step 2: Next, find and select (Troubleshoot) > (Advanced Options) > (Command Prompt) option.
Step 3: Next, enter the (diskpart) command in the command prompt window and press the (Enter) key. Type [list disk] and check the disk connected to the computer.
Step 4: Then enter (select disk 0) (0 is the disk number, please replace it with the target disk number where you need to save the Windows installation according to the actual situation). Then enter the (clean) command to clear all configuration information and data in the target disk.
Step 5: Enter (creat partition primary) to create a primary partition, and enter (active) to mark the partition as an active partition.
Step 6: Finally, enter the command format fs=ntfs quick (quickly format the partition and set the file system to NTFS) and Assign (assign the drive letter), then type (Exit) to close the command prompt window. Then reinstall the system to see if the problem is resolved.
There are several methods to resolve the “We could not create a new partition and could not find an existing one” error. If you have experienced data loss after installing Windows or while using your computer, you can utilize the following data recovery techniques to retrieve your lost data.
Renee Undeleter is a software specially designed to restore various data files. When you accidentally delete important files, empty the recycle bin, or format the memory card/disk/external hard drive, you can use this tool Get lost data back. This software covers four functional modules, including file recovery, format recovery, partition recovery and image creation, so it can help you solve many data loss problems that may occur during system use in an all-round way, which is very convenient.
Hot Topic - ADs Renee Undeleter – Simple & Powerful Software for Data Recovery 
Easy to use Recover data by 3 steps;
Multiple scan modes Fast partition scan, whole partition scan and whole disk scan;
Supported file types Image, video, audio, text, email and so on;
Image creation Create a partition image to read and back up data;
Supported devices SD card, SDHC, SDXC, USB flash drive, hard disk and computer.
▽ Free Trial (Win) ▽ Free Trial (Mac)The steps are as follows:
Step 1: Download, install and run Renee Undeleter, select the (Whole Partition Scan) option in the main interface.
Note: Do not install on the disk that needs to restore data, so as not to cause data overwriting.
Data recovery function introduction:
Fast Partition Scan – Quickly retrieve files lost due to accidental deletion or emptying the recycle bin.
Whole Partition Scan – Quickly recover files lost due to inaccessible or formatted partitions.
Whole Disk Scan – Analyze and get partition information and perform a full scan of the entire partition.
Image Creation – You can create a mirror image for a partition to back up the current partition state.
Step 2: Next, select the partition that needs to recover data, and click (Next). Then enter the scanning process, please wait patiently.
Step 3: After the scan is over, you can double-click on the file to preview, then select the file to be recovered, and click the (Recover) button.
Note: In order to prevent data overwriting, it is recommended to select an alternate disk or partition to store the recovered files instead of using the original disk where the data was lost.
Relate Links :
How to Fix When Files on SD Card Not Showing up on Android?
27-12-2021
Amanda J. Brook : Sometimes, the SD card files are not showing up on Android. How can we solve the problem? In...
How to Fix GoPro SD Card Error?
29-12-2021
Ashley S. Miller : Some people meet with the GoPro SD card errors, such as “NO SD” and “SD ERR”. In this...
Solutions to SD Card Unexpectedly Removed on Android
24-12-2021
Jennifer Thatcher : Some Android users complain that they always receive the notification saying that the SD is unexpectedly removed. In...
How to Fix Corrupted SD Card on Android?
16-12-2021
John Weaver : SD card is used in various devices, phones, cameras and video games. How to fix the corrupted SD...
Fix Windows 10 Partition Error: We Couldn't Create A New Partition
Comments
0 comments
Please sign in to leave a comment.